![](/Content/images/logo2.png)
Original Link: https://www.anandtech.com/show/3704/crucial-realssd-c300-firmware-part-iii
Crucial RealSSD C300 Firmware, Part III
by Anand Lal Shimpi on May 6, 2010 7:19 PM ESTPoor Crucial. Although it started its C300 campaign on the right foot, posting some very impressive sequential read speeds thanks to 6Gbps SATA and ONFI 2.0 NAND, things haven't been so smooth lately.
First off, Crucial's timing was unfortunate as it was right around the time we started seeing SandForce make some noise. Secondly, while performance was good, my drive showed some performance and reliability issues within two weeks of receiving it. And third, the firmware update that was supposed to address the problems I had managed to brick some drives.
If you bought a C300 there was a chance that your drive would brick itself by just using it. If you used the firmware that fixed the aforementioned problem, then there was a chance the process would brick your drive.
Crucial just gave me an update on the situation and things appear to be looking up: